230V 1 Phase 5.5 Hp Rotary Screw Air Compressor 125 psi NPT1/2" 19-15 CFM

Description

230V 1 Phase 5.5 Hp Rotary Screw Air Compressor 125 psi NPT1/2" 19-15 CFM
Model: DAC4
Working pressure: 125-150PSI
Airflow Volume:(CFM)19-15
Power:4KW 5.5hp
Cooling: Air
Electric motor: 230V/60HZ/1PH
Dimension: 930*800*710mm / 36*31*27 inch
Package Dimension: 1066*863*787mm / 42*34*31 inch
Weight:230kg
Weight(including packgage): 270kg
Warranty: 12 months
Output Pipe Diameter: G1/2"/ NPT1/2"
Full Load Amps: 24 Amps
【Multipurpose application】
Compressed air is a vital source of energy for applications such as general manufacturing, cabinet and trim shops, auto body and tire shops,
and commercial laundries.To meet varying air quality requirementsm, we responds to your needs by developing a total compressed air package.
For Air Brushing,Blow Cleaning,Bolting/Wrenching,Brad Nailing/Stapling,Cutting,Drilling,Finish Nailing,Framing Nailing,Grinding,
HVLP Painting,Hobby Nailing,Hobby Painting,Inflation,Roof Nailing,Sanding,Spraying,Surface Prep
Garage & Industrial & Light Duty
Features a programmable control system
Reduces your air system footprint and allows for easy maintenance
Caution:
Please read the operate manual carefully before start the compressor working
— Don’t dismantle any connector or equipment when machine is
running. Otherwise, the high-pressure gas and high temperature will
hurt you seriously.
— Please pay more attention to parts such as pump, oil tank and
pipelines, because they are high temperature when machine is running.
— Don’t try to change the working pressure rated . Because change
working pressure exceeding the rated range will cause machines to
overload and stop to work.
——
— Provide proper grounding connection for electric parts according
to electric security regulations. Use suitable wires matching the
working power, otherwise they will burnt out due to high temperature
or some other dangerous events occur.
— The compressed air for breathe use is prohibit.
Regular maintenance interval schedule:
Every 50 hours or weekly
--- Check oil level.
--- Check intake filter, if necessary clean it.
--- Drain condensation water from oil tank.
Every 500 hours
--- Check and adjust belt tension if necessary (belt driven only)
Every 2000 hours
--- Replace lubricants (for mineral lubricants oil)
--- Replace oil filter.
--- Replace intake filter
Every 4000 hours
--- Replace lubricants (for synthetic lubricants oil)
--- Replace oil separator
--- Clean cooler for dirt
Attention:
1、Replace filter element and lubricant after first 500 hours of operation.
2、Use incorrect lubricant oil and spare parts will cause compressor damage, only use original
manufacture oil and parts. 3、The service life of compressor depends on the environment conditions such as dust, vent
etc.
Guarantee period:
HPDMC products enjoy 1-year guarantee calculated from the buying date for complete machine.
we will not offer free of charge service to repair damaged machine due to installation error, using
error, bad oil, maintenance error and use of not original manufacturer parts.
For routine maintenance note that HPDMC technical service team are able to provide you with
assistance and spare parts.